Tips For Maintaining Your Car Tyres

An essential part of car maintenance is keeping your tyres in its excellent condition. Know that it is both dangerous and illegal to drive with damaged tyres. When it comes to tyre maintenance, there are plenty of numbers of things you must consider.

Car Tyre Maintenance Tips

Rotation – Tyres are usually moved from one position on the car to another in order to make sure that all of them have even wear and tear. Bear in mind that front tyres carry more of the car’s weight. Also, they tend to wear out at about twice the rate of those at the back. Hence, rotating the tyres can help extend their lifespan. Manufacturers will vary in their recommendations – generally, consider rotating it every 8,000 – 10,000 kms. The common types of tyre rotation are cross rotation, straight rotation, 4 wheel drive and 5 tyre rotation.

Pressure – This is very important for 2 basic reasons. First, a properly inflated tyre will protect against tyre damage. Second, this reduces the possibility that the car will spin out of control. It is highly advised that you check your tyre pressure once a month and always before hitting the road. You must not check the pressure when the tyre is hot because 4-5 PSI will be added to the recommended pressure.

Thread Depth – Thread depth measures the depth over the face of the thread that is in contact with the road. This is very important since it will help remove water between the road and tyre, making sure that the car will remain under control. Over time, tyres wear out. In fact, this can be accelerated by uneven road surfaces, the tyre’s design and driving practices like hard braking and high-speed driving.

Wheel Alignment – This is the process of aligning the wheels and axles properly. This will make sure that your car will efficiently handle its optimum level, enhancing safety, saving fuel and protecting tyres against premature wear and tear.

Wheel Balancing – This will balance the wheel and tyres. It will protect the bearings and suspension; thus, stopping vibration and preventing premature tyre wear. When driving at high speeds, the vibration cause by out of balance wheels is noticeable.

Whenever you are in doubt of the roadworthiness of your tyres, you must take them to a trusted tyre specialist. These experts can check the internal and external condition of the tyre. Moreover, they will check if it complies with all the proper procedures for repairing, disassembling and re-assembling. Most importantly, they will make sure that the tyre is re-fitted optimally.

Car Detailing Tips: How to Keep Your Tyres Looking Good

Keeping your tyres looking good as new is all in the way you drive and how you clean that part of your car. People will notice dirty wheels and it can give the car a bad look. Car detailing starts with keeping your tyres clean and amazing.

Treading on the tyres can easily be worn away when you are driving. You can minimise the amount of damage you do by driving correctly. Sudden braking and spinning can wear away the tread detail very quickly. Only apply sudden braking if safety calls for it. Always start applying the brakes when you are about five to ten meters away from the car in front of you. Spinning can be prevented by releasing the clutch as you apply fuel to the engine.

Did you know that there is a practical way to get your tyres to be glossy? This is known as dressing or protectant. Many car dealers will apply this substance on the tyres to give the car a glossier and more attractive appearance. It also protects the rubber from the UV lights of the sun and the toxic air pollution that degrades the quality rubber surface. The dressing or protectant also adds a layer to prevent any oil or dirt from sticking onto your tyre. This chemical isn’t greasy so it won’t cause you to spin on the road. Rather it is more of a non-stick surface that can grip onto the gravel or tar road.

Sunlight has the harsh ability to age and damage the rubber on the tyres. Over time you will start experiencing the tyres to be brittle and it can break with the slightest hit. However, you can avoid this from happening.

When cleaning your tyres you need to use a cloth, a high pressure hose and the cleaning detergent of your choice. You always start with hosing down the tyres to remove any dirt, oil or residue. This shouldn’t take long and will make the cleaning process easier. After you have hosed the dirt away you can apply the wheel detergent. To remove oil from the wheels you will require than just water so a wheel detergent would be ideal. Next, you can use brushes that can clean the treads and crevices. The cloth will absorb any water that was on the rim and leave it looking clean and sparkly.

Status is a big part of society so doing a bit of cleaning and shining can give you that little boost. Tyres are important when you are a driver. They allow you to move forward and to climb an incline without over-using your throttle. So keep them clean and in good condition.